| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.438 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.438 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.203 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| ADJS | EXTERIOR COLOR | BLACK |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.688 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.812 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.750 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.500 INCHES NOMINAL 1ST END |
| AFQN | FLANGE LENGTH | 2.750 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 1.438 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 1.562 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED 1ST END |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.062 INCHES MINIMUM AND 0.064 INCHES MAXIMUM 1ST END |
| AJED | RAISED FACE HEIGHT | 0.062 INCHES MINIMUM AND 0.064 INCHES MAXIMUM 2ND END |
| AJEE | RAISED FACE DIAMETER | 1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM 1ST END |
| AJEE | RAISED FACE DIAMETER | 1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 3200.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD AND 1ST LAYER BRAIDED COTTON CORD |
| CQGM | MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 87.750 INCHES MINIMUM EXCLUDING END FITTINGS AND 88.250 INCHES MAXIMUM EXCLUDING END FITTINGS |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| FEAT | SPECIAL FEATURES | MICROINCH FINISH OF 63 ON BOTH RAISED FACES; BOLT HOLES COUNTERBORE 0.031 IN DEEP BY 0.656 IN DIA |
| MARK | SPECIAL MARKINGS | METAL IDENTIFICATION TAG ATTACHED WITH METAL STRAP |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
