Thank you for your interest in Caro Inc part number 3416-1205-1235, a Lathe Engine item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 3416-00-449-7188, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
Besides part number 3416-1205-1235, you may browse our platform further for similar components produced by Caro Inc under the CAGECode 55985, as well as additional products that are categorized under FSC 3416 Lathes. If you have any questions regarding our services or the NSN 3416-00-449-7188 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number 3416-1205-1235 at your earliest convenience.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 0.750 |
| ADQR | Center To Center Distance | 35.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 115.0 AND 230.0 |
| FAAZ | Phase | SINGLE |
| FEAT | Special Features | 1 KNURLING TOOL,LATHE,SELF-CTR.,W/DIAMOND KNURLS 1/2BY1-1/8 IN.SHANK;1 EA MANDREL,EXPANSION,SLEEVE,1/2TO11/16,11/16TO1,1TO1-9/32,1-9/32TO1-9/16 IN-.RNAGE;1 EA,PLATE,ADAPTER,CHUCK MTG,UNFINISHED,5,5-7/8 IN.DIA;1 EA PLATE,FACE,11,5 IN.DIA;1 POST,TOOL;1 EA REST,FOLLOWER,STEADY;1 SCREW,THD DEPTH STOP/SPEC/;1 STOP,THD DEPTH;1 EA WRENCH,BOX,DOUBLE HEAD,12 POINT,LG 15 DEG OFFSET,9/16 AND 5/8,1-1/16 AND 1-1/4 IN. OPENINGS" |
| BTSZ | Spindle Speed Quantity | 8 |
| BTTD | Rated Swing | 12.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 12.500 INCHES NOMINAL |
| BTWL | Headstock Drive Type | GEARED HEAD |
| FREQ | Frequency In Hertz | 60.0 |
| AKYD | Accessory Components And Quantity | 4 BELTS/V/;1 BUSHING,SPINDLE CTR.;2 CTRS.,TAILSTOCK,HEADSTOCK,NO.2 MORSE TAPER;1 CHUCK,LATHE,IND.,MED.DUTY,4 JAW,10 IN.W/WRENCH;1 CHUCK,LATHE,SCROLL SELF CTR.,MED.DUTY,3 JAW,UNIV.,W/REV.JAWS,6 IN.W/WRENCH;24 CUTTER BIT,TOOL HOLDER H-SPEED STEEL,UNFINISHED,SQ,5/16BY2-3/4 IN.;1 CUTTER BIT,TOOL HOLDER,UNFINISHED,BEVELED,1/8BY3/4BY6 IN.;3 CUTTER BIT,TOOL HOLDER,UNFINISHED,SQ,1/4BY2-1/8 IN.;1 DIAL,INDICATING,THD CHASING;1 DOG SET,1 EA,BENT TAIL,SINGLE SCREW 1/2,3/4,1,1-1/4,1-1/2 IN.CAP;1 HOLDER,CUTTING TOOL,BORING W/BORING BAR,30,45 AND 90 DEG END CAPS,CUTTER BITS AND WRENCH,1/2BY1-1/8 IN.SHANK,3/4 IN.BAR DIA;1 HOLDER,CUTTING OFF,STRAIGHT SHANK,W/CUTTER BIT,AND WRENCH,1/2BY1-1/8 IN.SHANK;1 EA RH,LH,STRAIGHT HOLDER,CUTTING TOOL,TURNING,OFFSET,W/CUTTER BIT AND WRENCH,1/2BY1-1/8 IN.SHANK;1 EA WRENCH,TAILSTOCK,TOOL POST" |
| BTWM | Headstock Center Taper Size Designator | 2 MORSE |
| BTYP | Hole Diameter Through Spindle | 1.313 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYT | Carriage Feed Change Quantity | 57 |
| BTYW | Gear Change Type | QUICK |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
