Request a Quote on Part Number 13214E2708 with the NSN 5340-01-181-6158 by Cecom Lr Center

Part Number: 13214E2708

Manufacturer: Cecom Lr Center

NSN: 5340-01-181-6158

NIIN: 011816158

Item Name : Bracket Angle

CAGE Code: 97403

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country : USA

NCB Code : 01

Thank you for your interest in Cecom Lr Center part number 13214E2708, a Bracket Angle item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 5340-01-181-6158, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Besides part number 13214E2708, you may browse our platform further for similar components produced by Cecom Lr Center under the CAGECode 97403, as well as additional products that are categorized under FSC 5340 Hardware Commercial. If you have any questions regarding our services or the NSN 5340-01-181-6158 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number 13214E2708 at your earliest convenience.

NSN Information for Part Number 13214E2708 with NSN 5340-01-181-6158, 5340011816158

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-181-6158 Item PartTypeName: BRACKET,ANGLE	5340	011816158	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
13214E2708	5	2	3

Characteristics Data of NSN 5340-01-181-6158, 5340011816158

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN
ADLK	FIRST LEG LENGTH	3.850 INCHES MINIMUM AND 3.910 INCHES MAXIMUM
ADLL	SECOND LEG LENGTH	5.000 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	NSN 2350-00-808-7100
AHLF	SECOND LEG WIDTH	5.320 INCHES MINIMUM AND 5.440 INCHES MAXIMUM
AHLK	FIRST LEG HOLE DIAMETER	0.548 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
AHLP	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	3.000 INCHES NOMINAL
AHLS	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	2.500 NOMINAL INCHES
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.160 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.750 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.375 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.375 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	5.320 INCHES MINIMUM AND 5.440 INCHES MAXIMUM
AHQQ	FIRST LEG END WIDTH	4.440 INCHES MINIMUM AND 4.800 INCHES MAXIMUM
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	3.788 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.600 INCHES NOMINAL
AJZU	FIRST LEG STYLE	CHAMFERED ENDS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
AKBU	SECOND LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	FOUR HOLES
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CWPD	FIRST LEG CHAMFER ANGLE	45.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	FIRST LEG HAS A ROUNDED CUTOUT,RADIUS MINIMUM 1.32 INCHES MAXIMUM 1.44 INCHES.IN THE CENTER OF THE WIDTH DIMENSION
MATT	MATERIAL	ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5456 OR ALUMINUM ALLOY 6061
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/4,TH111 OR TH112 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B221,TH111 OR TH112 ASSN STD 1ST MATERIAL RESPONSE OR QQ-A-200/5,TH111 OR TH112 FED SPEC 2ND MATERIAL RESPONSE OR ASTMB221,TH111 OR TH112 ASSN STD 2ND MATERIAL RESPONSE OR QQ
SFTT	SURFACE TREATMENT	PLASTIC POLYAMIDE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-22750,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ANGLE