Request a Quote on Part Number D408-N-PPS-2-5K with the NSN 5905-01-526-3114 by Clarostat Sensors And Controls

Part Number: D408-N-PPS-2-5K

Alternate P/N: D408NPPS25K

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-526-3114

NIIN: 015263114

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country : USA

NCB Code : 01

Thank you for your interest in Clarostat Sensors And Controls part number D408-N-PPS-2-5K, a Resistor Variable Nonwire Wound item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 5905-01-526-3114, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Besides part number D408-N-PPS-2-5K, you may browse our platform further for similar components produced by Clarostat Sensors And Controls under the CAGECode 12697, as well as additional products that are categorized under FSC 5905 Resistors. If you have any questions regarding our services or the NSN 5905-01-526-3114 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number D408-N-PPS-2-5K at your earliest convenience.

NSN Information for Part Number D408-N-PPS-2-5K with NSN 5905-01-526-3114, 5905015263114

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-526-3114 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND,	5905	015263114		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC

Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
D408-N-PPS-2.5K	5	9	3

Characteristics Data of NSN 5905-01-526-3114, 5905015263114

MRC	Criteria	Characteristic
AEDX	SHAFT STYLE	ROUND, SLOTTED
AEEA	SWITCH TYPE	PUSH-PULL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.100 INCHES NOMINAL
AKPV	MOUNTING FACILITY QUANTITY	1
APXH	TERMINAL LOCATION	LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	SLOT
CBBL	FEATURES PROVIDED	SWITCH
CQCC	ELECTRICAL RESISTANCE PER SECTION	2500.0 OHMS ALL SECTIONS
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 HEAT SINK ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 ALL SECTIONS
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	0.875 INCHES NOMINAL
ABTD	MOUNTING SLOT WIDTH	0.031 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.750 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.250 INCHES NOMINAL
ADAQ	BODY LENGTH	1.062 INCHES NOMINAL
ADAT	BODY WIDTH	0.500 INCHES NOMINAL
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	0.875 INCHES NOMINAL
ABTD	MOUNTING SLOT WIDTH	0.031 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.750 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.250 INCHES NOMINAL
ADAQ	BODY LENGTH	1.062 INCHES NOMINAL
ADAT	BODY WIDTH	0.500 INCHES NOMINAL
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND, SLOTTED
AEEA	SWITCH TYPE	PUSH-PULL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.100 INCHES NOMINAL
AKPV	MOUNTING FACILITY QUANTITY	1
APXH	TERMINAL LOCATION	LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	SLOT
CBBL	FEATURES PROVIDED	SWITCH
CQCC	ELECTRICAL RESISTANCE PER SECTION	2500.0 OHMS ALL SECTIONS
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 HEAT SINK ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 ALL SECTIONS
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN