Request a Quote on Part Number 9M700C1-10LAW with the NSN 5340-01-131-2304 by Fastener Specialty Inc

Part Number: 9M700C1-10LAW

Alternate P/N: 9M700C110LAW

Manufacturer: Fastener Specialty Inc

NSN: 5340-01-131-2304

NIIN: 011312304

Item Name : Bracket Angle

CAGE Code: 04967

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country : USA

NCB Code : 01

Thank you for your interest in Fastener Specialty Inc part number 9M700C1-10LAW, a Bracket Angle item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 5340-01-131-2304, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Besides part number 9M700C1-10LAW, you may browse our platform further for similar components produced by Fastener Specialty Inc under the CAGECode 04967, as well as additional products that are categorized under FSC 5340 Hardware Commercial. If you have any questions regarding our services or the NSN 5340-01-131-2304 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number 9M700C1-10LAW at your earliest convenience.

NSN Information for Part Number 9M700C1-10LAW with NSN 5340-01-131-2304, 5340011312304

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-131-2304 Item PartTypeName: BRACKET,ANGLE	5340	011312304		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
9M700C1-10LAW	5	2	3

Characteristics Data of NSN 5340-01-131-2304, 5340011312304

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
AHLF	SECOND LEG WIDTH	1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
AHLG	SECOND LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHLK	FIRST LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.263 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
AHLP	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.000 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHPW	FIRST LEG THICKNESS	0.063 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.063 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
AHQP	FIRST LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHQY	FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AHQZ	FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	CORNER RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	THREE HOLES
AKBU	SECOND LEG STYLE	CORNER RADIUS
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES
CBBL	FEATURES PROVIDED	NUT
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	NUT LH POSITION AND INVERTED INSTALLATION
MATT	MATERIAL	ALUMINUM ALLOY 2024
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/3 T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T72 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T81 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	ANODIZE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ANGLE