Thank you for your interest in Omatech Service Ltd part number 1334-MOD, a Lathe Engine item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 3416-01-037-2169, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
Besides part number 1334-MOD, you may browse our platform further for similar components produced by Omatech Service Ltd under the CAGECode 0B6Z5, as well as additional products that are categorized under FSC 3416 Lathes. If you have any questions regarding our services or the NSN 3416-01-037-2169 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number 1334-MOD at your earliest convenience.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| AWHA | Bed Type | SOLID |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| ELEC | Voltage In Volts | 230 |
| FREQ | Frequency In Hertz | 60 |
| BTTF | Actual Swing Over Bed | 13.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
| AAXX | Mounting Type | BENCH |
| ADQR | Center To Center Distance | 30.000 INCHES MINIMUM |
| AKYD | Accessory Components And Quantity | 2 CENTER,LATHE NO.3 MORSE TAPER;1 CHUCK,COLLET,SPINDLE NOSE 1/16THRU1-3/8 IN;1 CHUCK,DRILL 1/16THRU1/2,NO.3 MORSE TAPER SHANK;1 CHUCK,4-JAW,IND.10 IN.DIA;1 CHUCK,3-JAW,UNIV.,8 IN.DIA;1 COLLET SET,FLEX RUBBER 1/16THRU 1 IN;1 EA,DOG,LATHE BENT TAIL 1/2,3/4,1,1-1/4,1-1/2,1-3/4;1 DRIVE PLATE 6-1/2 IN.DIA;1 FACEPLATE LG 12 IN.DIA;1 GEAR SET,LATHE METRIC TRANSPOSING;1 HOLDER CUTTING TOOL BORING BAR;1 EA,HOLDER CUTTING TOOL CUT-OFF,LH,RH,STRAIGHT;1 EA,HOLDER,CUTTING TOOL TURNING,LH,RH,STRAIGHT;1 HOLDER THREADING TOOL 60 DEG SHARP V-FORM;1 KNURLING TOOL,SELF-CTR LATHE W/3 PR.KNURLS DIAMOND PATTERN;1 EA,PLUG,COLLET RUBBER 1/8TO3/8,1/2TO5/8,3/4TO7/8,1TO1-1/8 IN;1 EA,REST,FOLLOWER,STEADY LATHE;1 SLEEVE CTR;1 STOP CARRIAGE LATHE MICROMETER,1 TAPER ATTACHMENT LATHE TELESCOPIC |
| APGF | Design Type | SCREW |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYW | Gear Change Type | QUICK |
| MRC | Decoded Requirement | Clear Text Reply |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | 0.029444444 |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | POWER |
| BTYS | Carriage Cross Feed Operation Method | POWER |
| AWLX | Electric Motor Quantity | 1 |
| ASHK | Electric Motor Horsepower Rating | 1.25 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
