Thank you for your interest in Sensor Systems Inc part number 9866, a Resistor Variable Nonwire Wound item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 5905-00-079-8634, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
Besides part number 9866, you may browse our platform further for similar components produced by Sensor Systems Inc under the CAGECode 04454, as well as additional products that are categorized under FSC 5905 Resistors. If you have any questions regarding our services or the NSN 5905-00-079-8634 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number 9866 at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-079-8634 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 000798634 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 20SF6096 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0630 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.500 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0550 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.000 NOMINAL INCHES |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.000 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 2.218 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0880 NOMINAL MILS AND 0.0980 NOMINAL CENTIMETERS |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 3.141 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 PERCENT,RATED AMPERES C AND BETTER FLOORING |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/400.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1250.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK PRIMARY INPUT |
| FEAT | SPECIAL FEATURES | COUPLING ATTACHED TO SHAFT |
| TEST | TEST DATA DOCUMENT | 18876-13059259 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
