Thank you for your interest in Sensor Systems Inc part number 9603, a Resistor Variable Wire Wound Non item that we offer here on Aerospace Materials Supply. This product is listed with the NSN 5905-00-920-8973, and you can obtain customized procurement solutions on this component from our team members by completing and submitting the form below. For our specialists to best deliver quotes that accommodate your specifications, please be sure we are presented with essential details like your target price, desired quantity, and anticipated fulfillment timeline. Once we have the opportunity to receive and review your submission, we will strive to provide a tailored response for your consideration within 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
Besides part number 9603, you may browse our platform further for similar components produced by Sensor Systems Inc under the CAGECode 04454, as well as additional products that are categorized under FSC 5905 Resistors. If you have any questions regarding our services or the NSN 5905-00-920-8973 items that we sell, you may always give us a call or email, as we would be delighted to assist you in any way that we can. Otherwise, we encourage you to request a quote for part number 9603 at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-920-8973 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 009208973 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9603 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.87495 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.932 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.87495 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 2.025 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.150 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.200 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 60.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 60.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 200.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.001 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT,RATED AMPERES C AND BETTER FINISH |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -500.0 TO 500.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 7TH SECONDARY PATTERN |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.26 7TH SECONDARY FINISH |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 1ST SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| TEST | TEST DATA DOCUMENT | 89954-539D818 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
